Adsorption dehumidifiers of AD (Airdry) range are indicated for use in environments where humidity constant values are required even at low temperatures (from -20°C to +40°C) and values ??DewPoint very low (up to -60°C) as SMD electronics, packaging of medicines and leather treatment.
The AD models using a rotor made of composite material in hygroscopic fiber with a diameter of <6 microns upon which are permanently attached absorbent elements (silica gel 82%, 2% of the acrylic surface with strength 200 kPa from every direction, pore surface 600 m2/g).
In AD dehumidifier the rotor has a large contact surface that allows an exchange capacity equal to 3.000 m2/m3 of the rotor, with a structure that allows a laminar regime of the flow of air to be dehumidified. The dehumidification process is continuous, with the expulsion of the humid air outside without condensation water.
To limit the energy consumption resulting TFT proposes integrative solutions as the Heat Recovery Systems capable of recovering up to 60% of the heat generated by the machine to re-enter the cycle of operation, generating a considerable saving.

AD (Airdry)

ADS 150E – 300E

Adsorption dehumidifier for industrial applications.

AD (Airdry)

AD 100E – 1250E

Adsorption dehumidifier for civil and industrial applications.

AD (Airdry)

AD 800E – 1100TE

Adsorption dehumidifier for industrial applications.

AD (Airdry)

AD 1000E – 3100TE

Adsorption dehumidifier for industrial applications.

AD (Airdry)

AD 3000E – 6500TE

Adsorption dehumidifier for industrial applications.

AD (Airdry)

AD 7000E – 25000E

Adsorption dehumidifier for industrial applications.

AD (Airdry)

ADP 2000E – 9500E

Adsorption dehumidifier for industrial applications.

AD (Airdry)

ADP 2002E – 9502E

Adsorption dehumidifier for industrial applications.

A new system to dry